
Redline
D.28
Comfort functions
A
B
C
D
E
F
G
X
Function
Reducing the voltage to a very low
(safety) voltage used mainly as
control-voltage in order to reduce
the risk of electrocution due to
environmental circumstances
(I.e. high degree of humidity like out-
doors, in a swimming pool complex,
etc.).
Approvals
(1)
(1) Depending on the type
Series T
Applications
Going from supplying power to a bell circuit, to supplying power to the
control circuit of impulse switches, relays or contactors for the control of
lighting, heating, etc.
Features
Safety transformers have short-circuit protection and continuous nominal
power. Bell transformers are recommended for intermittent use at the
nominal power declared (50% for continuous use). Devices with integrated
on/off switch or with integrated buzzer are available. Complete noiseless
operation. Full power available at all secondary voltages. The safety
terminals are equipped with captive Pozidriv screws and have IP20
protection degree.
Standards
IEC 61558-1-2-6: Safety transformer
IEC 61558-1-2-8: Bell transformer
More technical data
Dimensions
website
pg D.47
Transformers
Performance
Nominal primary voltage and frequency
Secondary voltage at nominal primary voltage
Maximum secondary voltage at zero load
Minimum secondary voltage at nominal load
Maximum load
Short-circuit protection
Operating temperature
Isolation voltage
Protection degree
Screw
Terminal capacity: min
max
Bell transformer
230V 50Hz / 240V 60Hz
8 or 12V
1.5xUn sec.
0.85xUn sec.
Nominal power
PTC
-20…+40°C
4kV
IP 20
Pozidriv 1
1x1mm
2
1x16mm
2
or 2x6mm
2
Safety transformer
230V 50Hz / 240V 60Hz
12 or 24V
1.05xUn sec.
1xUn sec.
Nominal power
PTC
-20…+40°C
4kV
IP 20
Pozidriv 1
1x1mm
2
1x16mm
2
or 2x6mm
2
Kommentare zu diesen Handbüchern