AT-S73, AT-S99 and AT-S102 Version 4.0.1 Software Release Notes
PN 613-001136 Rev. B 11 Allied Telesis Inc.
Phase 7: Upgrading the AT-S99 Management Software on the AT-CV5M02 Management
Card to Version 4.0.1
To update the management software on the management card:
1. From the Main Menu, select Image Download.
2. From the Image Download Menu, select Image Download via TFTP.
3. In the Image Download via TFTP menu, select Management Card Image Download.
The management card begins the upgrade process by querying the TFTP server for the image file of
the AT-S99 Management Software. After the management card has received the file, it writes the file
to flash memory and then resets. The entire process takes about two minutes. (The RDY LED on the
line card does not light up until the card has initialized its management software.)
CAUTION:
Do not remove the management card or power off the chassis while it is writing the image file to flash
memory. Doing so may damage the card.
4. To verify the upgrade process after it is finished, return to the Main Menu and select Module Status
and Configuration.
5. Examine the Ver. column for the AT-CV5M02 Management Card. If the upgrade was successful, the
version number should be “V401.”
Troubleshooting the Upgrade Procedure
If you encounter a problem during the upgrade process, you may be able to resolve it by reviewing the
suggestions here.
The management card failed to obtain an IP address configuration from the DHCP server on your network
after you activated the client:
Check to be sure that the DHCP server on your network is operating properly.
If the DHCP server is configured to assign only static address configurations based on the MAC
addresses of the network devices, you’ll have to add the Converteon chassis’ MAC address to the
server. (The management card adopts the chassis’ MAC address as its address when it communicates
with your network.) To view the chassis’ MAC address, select Administration -> Diagnostics ->
Chassis Diagnostics from the Main Menu.
The management card is unable to download an image file from the TFTP server:
Check to be sure that the 10/100Base-TX port on the management card is connected to a device on
your network, such as an Ethernet switch.
Check to be sure that the TFTP server is running.
Check to be sure that the TFTP server has the image files of the AT-S73 Management Software
programs.
Repeat Phase 4 and check the following:
— If the management card and the TFTP server reside on different networks, the IP address
configuration of the management card must include a default gateway address that specifies the
first hop to reaching the remote network that has the TFTP server.
Repeat Phase 5 and check the following:
— Verify that you correctly entered the IP address of the TFTP server in the TFTP Image Download
Configuration Menu.
(88 Seiten)
(28 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern